top of page

Pacific Series E-EG


The bearing of the crankshaft has rollers, which is very strong, made in Europe, and has a long life. The oil pump passes through the filter and absorbs the metal magnet in the lubricating oil to provide constant lubrication for the internal work of the block and remove impurities at the same time. Compressed air cooling is accomplished through inter-stage stainless steel cooling coils.

Rack efficiency
The frame is designed to reduce weight and size, making the compressor lightweight and portable, and the aluminum frame is coated with epoxy powder coating. Powder coating and stainless steel components can also protect the compressor from corrosion in the marine environment.

Pacific E-EG

BREATHING AIR is a product series, including several products produced by NARDI! Used to provide breathable air for filling cylinders for different applications (ie: scuba diving, safety and rescue, military, etc.). The Pacific column is a group of compressors with different capacities, which are very efficient and very sturdy to ensure continuous operation for several hours.

Compressor unit quality
The compressor unit or pump unit is the core of the Pacific series compressors. This is a key component that NARDI pays special attention to. It has unique characteristics in the world, such as the use of light alloys with high thermal efficiency (such as those used to make cylinders). Aluminum alloy), the pump set is not painted to enhance the heat dissipation performance of its low-corrosion assembly components.


Control and electronic equipment
In order to make the compressor run normally, NARDI designed a new electronic control panel. This new system controls all key points such as temperature, oil level, current consumption, inlet pressure, outlet pressure, and manages all valves and solenoid valves. In addition, the electronic control panel handles the service schedule and monitors the status of the filtering system.

Filter purity
The compressor is equipped with various filters and separators: two separators are assembled on the compressor unit, and a final filter PAC is installed on the frame, dedicated to breathing air. The compressor is equipped with a large filter, which guarantees the supply of breathable air for a long time, in accordance with the UNI EN 12021:2014 standard. The Pacific series compressors can integrate an innovative air control system that can analyze the continuous flow of air connected to the electronic control panel and display humidity, CO, CO2 and air temperature in real time. The system will not calculate or check the filter cartridge based on experience, but will perform analysis. When the result does not match the breathing air standard, it will automatically stop the compressor. Therefore, the system continuously monitors the filter cartridge, checks for saturation, and warns when the filter cartridge needs to be replaced.

Economic performance
All equipment in the compressor is designed to optimize operating costs and labor costs. In order to optimize the cost of compressor operation, NARDI designed the compressor's automatic condensate drain device, which is equipped with a unique patented slow flow system, which can reduce the exhaust volume by 80%, thereby saving the pressure of the entire system.


1 compressor unit
2 Three-phase motor
3 cooling coil
4 filter separator
5 Breathing Air Filter PAC
6 Condensate drain

7 filling equipment with 2 air outlets
8 Electronic control panel
9 frame is made of aluminum and stainless steel
10 handles are easy to carry

bottom of page